The purpose of this article is to explain which hardware and configuration are essential for a successful WirelessHART implementation.
1. When I order the sensor, have I already purchased WirelessHART?
No, you will need to order the WirelessHART communication protocol before the sensor is shipped.
To order the WirelessHART communication protocol, remember to check the C10-WirelessHART option in the RFQ page.
WirelessHART is available on all Rheonics standard viscometers and density meters that use SME electronics. The video below shows the steps to add WirelessHART to the device configuration.
2. Can I order WirelessHART after a sensor is shipped?
Yes, communication protocols like WirelessHART can be ordered later. Contact Rheonics sales to order or go to our Order page https://rheonics.com/request-for-quotation/
Figure 1. Ordering WirelessHART communication.
3. Cabling
4. References
- Rheonics, "SRV Inline Viscometer." [Online]. Available: Rheonics SRV » inline online Viscometer for fluid viscosity monitoring. [Accessed: Sep. 9, 2025].
- Rheonics, "SRD Inline Density Meter." [Online]. Available: rheonics SRD » Density Meter inline online specific gravity concentration. [Accessed: Sep. 9, 2025].
- Rheonics, "Electronics and Communication." [Online]. Available: Electronics and Communication » rheonics :: viscometer and density meter . [Accessed: Sep. 9, 2025].
- Rheonics, "HART Fundamentals." [Online]. Available: HART Fundamentals : Rheonics Support . [Accessed: Sep. 9, 2025].
- FieldComm Group, "WirelessHART – Expanding the Possibilities" (Rev. 3.3 brochure). [Online]. Available: WirelessHart_Expanding_Possibilities_bro_Rev3.3.pdf . [Accessed: Sep. 9, 2025].
- Rheonics, "Getting Started with WirelessHART Communication". [Online]. Available: Getting Started with WirelessHART Communication